Electric Battery Powered Reach Truck

What is an electric forklift?

Feb 24, 2023

An electric forklift is a forklift, which uses electricity to do its work, mostly for batteries. The storage battery is a kind of battery, and its function is to store limited electric energy and use it in a suitable place. It works by converting chemical energy into electrical energy. This is the battery that is installed in the battery of the electric forklift.

The battery forklift uses the battery as the source power to drive the driving motor and the hydraulic system motor to realize driving and loading and unloading operations. Electric forklifts are loading and unloading vehicles powered by DC power supply (battery). In terms of new materials and new processes, the most important embodiment is the application of transistor controllers. Its appearance has greatly improved the performance of electric forklifts. Generally speaking, the durability, reliability and applicability of electric forklifts have been significantly improved, and they can completely compete with internal combustion engine forklifts.

4 wheel electric forklift truck

Operating procedures:

1. Maintain an appropriate starting speed when starting, and it should not be too fast.

2. Pay attention to observe the voltage of the voltmeter. If it is lower than the limit voltage, the forklift should stop running immediately.

3. When the forklift is moving, it is not allowed to change the driving direction by turning the direction switch, so as to prevent the electrical components from being burned out and the gears from being damaged.

4. Driving and lifting should not be carried out at the same time.

5. Pay attention to whether the sound of the drive system and the steering system is normal. If any abnormal sound is found, the fault should be eliminated in time. It is strictly forbidden to work while sick.

6. Slow down in advance when changing.

7. When working on poor road conditions, the importance should be appropriately reduced, and the driving speed should be reduced.


1. The weight of the goods must be known before lifting, and the weight of the goods must not exceed the rated lifting capacity of the forklift.

2. When lifting and packing goods, pay attention to whether the goods are wrapped firmly.

3. Adjust the distance between the forks according to the size of the goods, so that the goods are evenly distributed between the two forks to avoid unbalanced load.

4. When the goods are inserted into the cargo pile, the mast should be tilted forward. After the goods are loaded into the fork, the mast should be tilted backward, so that the goods are close to the fork wall, and the goods can be lowered as much as possible before driving.

5. When lifting goods, it should generally be carried out in a vertical position.

6. During manual loading and unloading, the hand brake must be used to stabilize the fork.

7. Walking and lifting are not allowed to operate at the same time.

8. When carrying goods on steep roads, pay attention to the firmness of the goods on the forks.

Battery maintenance:

1. Polyester fiber pipe is used, which has good elasticity, small aperture, low resistance and high air permeability;

2. Fully insulated flexible connecting wire, no leakage current;

3. The valve structure that pops off the top plug, with a special electrolyte level indicator;

4. Equipped with a liquid injection cap with automatic water replenishment;

5. Imported high-quality oblique partitions with microporosity, high porosity and low resistance;

6. Adopt PP battery shell and cover material, which is impact-resistant;

7. The patented terminal sealing structure completely prevents plate growth and liquid leakage.

Need help? We can assist you!
Learn more about our products and services? Call +86-21-67601855
Contact Us

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.